2018 Vol. 8, No. 8

  Previous Issue | Next Issue 
Display Method:
Design and Test of Plastic Sheeting Cleaning Device about Greenhouse
CHEN Dajun, LI Tianhua, SHI Guoying, WEI Min, CHANG Jinming, ZHANG Yueshun
2018, 8(8): 1-4.
Abstract(808) [PDF 2610KB](171)
Abstract:
A cleaning device was designed for sunlight greenhouse plastic greenhouse，which was to solve problems of cleaning，low transmittance and affecting growth of crops.3D modeling was carried out based on computer aided design software Solidworks.Overall structure and key components were designed and simulated，and then experimental prototype model was built.Experimental results showed that film transmittance of greenhouse was greatly improved under condition of pure tap water and cleaning agent，highest from 51.6% to 78.3% by 26.7％，and from 51.6% to 80.6% by 29.0％.Cleaning device has a reasonable structure and obvious cleaning effect.It could meet purpose and requirements of users.
Adaptability Test of Different Tillage and Soil Preparation Machines to Rape Planter
AN Hongyan, LIU Wang, ZHANG Jingkai, SHENG Shun, XIE Jie, SUN Guiqin, WANG Rongxue, MIAO Qiusheng
2018, 8(8): 5-7.
Abstract(520) [PDF 396KB](120)
Abstract:
In order to improve quality of rape seed sowing in Beijing area，experiment of rape seed sowing machine under two kinds of tillage and land-leveling methods of driving rake and stubble rotary cultivator was carried out.Results showed that，compared with driving rake，stubble rotary cultivator had better operation quality，with high operation efficiency and good performance，but a little more fuel consumption.Considering seed quality of rape planter，driving rake tillage was more suitable for rape planter，under set operation conditions of planter，seed homogeneity variation coefficient of driving rake tillage was 25.5% lower than stubble rotary cultivator，consistency variation coefficient of seed quantity was 1.3% lower，seed quantity was 0.45 kg/hm2 higher，and operating speed was 0.09 hm2/h lower.
Design and Use of GMB2-105 Piston Diaphragm Pump
GU Lingling, ZHANG Lili
2018, 8(8): 8-11.
Abstract(499) [PDF 1204KB](132)
Abstract:
A new GMB2-105 piston diaphragm pump was introduced and its structure，application and operational principle were analyzed.Mainly technical parameters，use，adjustment method and fault treatment method about GMB2-105 piston diaphragm pump were stated，which could provide reference for institutions which produced and researched piston diaphragm pump.
Application of TRIZ Theory in Design Process of Round Baler-wrapper Combination
Asiga, LIU Jianping, MA Sai
2018, 8(8): 12-14.
Abstract(522) [PDF 1088KB](144)
Abstract:
TRIZ theory is a tool for product development professionals to solve problems，development strategies，and maximize value.Importance of TRIZ theory in product design was explained through introduction of application of TRIZ theory in design process of round baler-wrapper combination.
Application of Advanced Manufacturing Technology in Agricultural Equipment Manufacture
LI Shang, PENG Weiqin, CHEN Xuefei
2018, 8(8): 15-19.
Abstract(646) [PDF 748KB](152)
Abstract:
In view of situation that China′s agricultural machinery manufacturing industry can not integrate advanced manufacturing technology and enterprise production well，present situation of agricultural machinery and equipment manufacturing industry in China was analyzed，existing problems were pointed out，and corresponding solutions from aspects of manufacturing technology，operation management，design and manufacture and marketing were put forward.
Mechanization Technology of Soybean Drip Irrigation under Film
ZHANG Li, LI Yonglong, WANG Quanxi
2018, 8(8): 20-22.
Abstract(656) [PDF 443KB](144)
Abstract:
Mechanization technology of soybean drip irrigation under film is a comprehensive production and practical agricultural technology that applies a batch of advanced and applicable agricultural machinery，optimizes matching，and changes traditional soybean planting mode，that could improve economic benefit and mechanization level of soybean production. Main content of mechanization technology of soybean drip irrigation under film and planting and harvesting techniques of mechanization technology of soybean drip irrigation under film were introduced.
Practice of Full Mechanization Technology for Rice Production in Yongchuan District of Chongqing City
TANG Keming, AO Fangyuan, XIONG Zhigang, XIE Yingjie, LI Haishan
2018, 8(8): 23-26.
Abstract(748) [PDF 579KB](127)
Abstract:
In 2017，agriculture ministry demonstration project of main crop production full mechanization was organized in Yongchuan district of Chongqing city.Through careful organization and implementation，all construction tasks of project were completed and desired results were achieved.Through implementation of project，rice production in demonstration area has been mechanized in key links of cultivated land，sowing，plant protection，machine harvesting，drying and straw treatment.Economic，social and ecological benefits were obvious.Comprehensive mechanization level of rice production，cultivation and harvest reached 98.5%.A set of suitable Yongchuan region rice production mechanization technology model and agricultural machinery equipment configuration model was formed.
Theory and Practice of Information Disclosure of Agricultural Machinery Purchase Subsidy Policy
WANG Xiaoguang, LU Yubin
2018, 8(8): 27-31.
Abstract(545) [PDF 781KB](113)
Abstract:
Subsidy policy for agricultural machinery purchase was an important part of China′ s fiscal support policy system. Promoting disclosure of subsidy policy information was an important guarantee to ensure efficient，standardized and honest implementation of subsidy policy. On basis of consulting relevant literatures at home and abroad，theoretical basis of information disclosure of agricultural machinery purchase subsidy policy was expounded，practice and exploration process of information disclosure of governments at home and abroad was analyzed，development course，current situation and existing problems of information disclosure of agricultural machinery purchase subsidy policy in China were described，and some suggestions accordingly for improving related work were put forward.
Development for Precision and Variable Water and Fertilizer Integrated Equipment Based on PLC
LIU Mochen, LIU Guangdong, LI Fade, SONG Zhanhua, YAN Yinfa, SUN Junliang
2018, 8(8): 32-37.
Abstract(1074) [PDF 2278KB](162)
Abstract:
In view of problems of low water and fertilizer utilization rate and poor fertilizer uniformity in domestic agricultural production，a set of precision variable water and fertilizer integration equipment were developed.It regarded requirements for nitrogen，phosphorus，potassium and trace elements in growth stages of crops as a variable.PLC collected soil moisture and flow information，and controled opening of proportional solenoid valve.HMI as an operator interface，which could not only display soil moisture information and liquid fertilizer flow，but set fertilizer ratio and irrigation time.By field test，the device had advantages of accurate formula fertilization，simple operation and good stability.
Design of Monitoring System for Pesticide Safe Transportation Based on CAN Bus
LIU Chang, LI Zhigang, WEI Liguo, WANG Fengzhu, WANG Jizhong
2018, 8(8): 38-44.
Abstract(623) [PDF 5578KB](142)
Abstract:
Chemical composition of pesticide products is highly corrosive and toxic，transportation cost of pesticide is relatively high in midwestern and northeastern agricultural area，accidents due to pesticide transport occurs frequently.To meet requirement of pesticide safety transportation，a set of safety transportation monitoring system based on CAN bus was developed，multi-data fusion method combining with 3G communication，Beidou positioning technology and so on were adopted to system，that could monitor internal environment parameters in car including temperature，humidity，pressure and odor concentration and vehicle operation parameters including speed，acceleration and location.Corresponding tests were carried out，results showed that，relative error of measurement was less than 7%，level of standardization and informatization of agricultural transportation was improved.
Development of Self-cleaning Soil Parameter Monitor for Greenhouse
CHENG Qiansheng, QIU Rongbin, YE Dapeng, LUO Zhicong, LIANG Huihuo
2018, 8(8): 45-49.
Abstract(545) [PDF 4092KB](165)
Abstract:
Normal growth of crops was affected by soil environmental parameters of greenhouse.Therefore，it needs to be monitored for a long time.For existing fixed greenhouse soil parameter monitor，sensor ends are widely buried in soil for a long time，which leads to shorter service life of sensor.A soil parameter monitor based on Arduino was introduced.Instrument could be used to detect soil parameters regularly.It provided real-time and accurate reference data for ratio of soil nutrients required for plant growth and time irrigation.After data acquisition was completed，probe position of sensor was automatically cleaned and maintained. Electrochemical corrosion caused by long time contact with soil was slowed down，and service life of sensor was improved.This monitor lays a foundation for development of intelligent network system for intelligent greenhouse environment monitoring.
Agricultural Machinery Equipment Maintenance Technology Management System Construction Based on MVC
ZHANG Bo
2018, 8(8): 50-53.
Abstract(616) [PDF 655KB](123)
Abstract:
Maintenance of agricultural machinery plays an important role in smooth operation of agricultural production.Increased competition for agricultural production requires maintenance improvements，with goal of reducing maintenance costs while maintaining safety of machinery and equipment.Using architecture of MVC，preventive maintenance technology of various agricultural equipment was used as knowledge base，and information technology was used to provide reliable and guiding means for maintenance of agricultural machinery.With Condition Based Maintenance（CBM）technology as basis of business process，main related processes were mainly introdced，such as Condition Monitoring（CM）provided support for equipment maintenance strategy，and through establishment of signal processing program，fault maintenance methods was selected.
Agricultural Information Service Based on Data Mining
LIU Caili
2018, 8(8): 54-57.
Abstract(593) [PDF 958KB](124)
Abstract:
Aiming at problem of how to effectively use massive data information of China′s current agricultural website to serve China′s agricultural production，combined with relevant theories and knowledge of data mining，HTML text extraction technology was introduced to extract Web agricultural data information，so as to build a data warehouse after data mining process for data mining was processed and designed.Finally，above data mining model was verified by taking a vegetable web as an example.Research results showed that data mining algorithm was consistent with actual information in aspect of agricultural product price and other information mining.At the same time，validity of data processing and mining methods constructed was verified.It would provide reference and reference basis for current agricultural information service.
Construction of Agricultural Information Service Platform Based on J2EE
LI Rui
2018, 8(8): 58-60.
Abstract(599) [PDF 1925KB](146)
Abstract:
Current informatization level of agricultural service in China was very low，which seriously restricted development of China′s agricultural economy.Combined with current mainstream technology of computer development，a agricultural infomation service platform based J2EE was provided to further improve service level of agricultural information in China.From concept of J2EE，JSP development technology was combined with together.Information service platform was detailed designed from agricultural inforation service function module，overall architecture，database，user rights and other aspects respectively.It provided more information services for development of modern agriculture and help to solve issues of agriculture，farmer and rural area.
Practical Development of Modern Physical Agricultural Engineering Technology
DING Zusheng
2018, 8(8): 61-63.
Abstract(582) [PDF 527KB](148)
Abstract:
Modern physical agricultural engineering technology was analyzed，development proposals were put forward based on current situation of agriculture，examples and inspiration of development of state-owned farm，that could provide practical basis and reference for deep promotion of modern physical agricultural engineering technology.
Investigation and Landscape of Hedgerow Resources in Guanzhong of Shaanxi Province
TONG Yuqin
2018, 8(8): 64-69.
Abstract(448) [PDF 840KB](132)
Abstract:
Based on investigation of resources and landscape of hedgerows in Guanzhong area of Shaanxi province，results showed that there were 25 families and 77 species of hedgerows in the area.Among them，33 species of evergreen and semi-evergreen species accounted for 42.9%，44 species of deciduous species accounted for 57.1%，and there were 37 species of foliage trees，40 species of ornamental flowers，16 species of ornamental fruits and 8 species of thorns.Through investigation of application of hedgerow resources and landscape analysis of current situation，there was a problem that hedgerows were not highly diverse and create similar landscapes.They also had extensive management of landscaping and poor landscaping.Ecological priority was given to strengthen application of native tree species，appropriate use of exotic species，and vigorously develop the local wild resources to enrich plant diversity.The use of hedging landscapes should adhere to principle of diversity and unity，coordination and contrast，balance，rhythm and tempo，and cultural connotation so as to enhance landscape heterogeneity.By strengthening training of practitioners and raising level of management skills to enhance ornamental value of hedgerow landscape.
Disinfection and Remediation Technology of Protected Vegetable Soil
ZHANG Ye
2018, 8(8): 70-71.
Abstract(519) [PDF 350KB](133)
Abstract:
Specific methods of soil disinfection and remediation technology for protected vegetable were introduced, which was of great significance for ensuring high quality production of protected vegetable.
Current Situation and Strategies of Comprehensive Management of Rural Environment
WANG Hui
2018, 8(8): 72-74.
Abstract(565) [PDF 467KB](128)
Abstract:
Pollution of rural environment restricted development of modern agriculture to some extent，so it is necessary to strengthen governance of rural environment.There are many reasons for pollution of rural environment，among which the most serious one was arbitrary disposal of household garbage，burning of agricultural straw and pollution of agricultural animal husbandry.In order to effectively carry out work of rural environmental governance，it is necessary to deeply analyze causes of rural environmental pollution and explore effective solutions.Rural environment development influencing factors were analyzed and rural environment management would be depened.
Landscape Design Based on Ecological Restoration
ZHANG Gang
2018, 8(8): 75-77.
Abstract(422) [PDF 448KB](123)
Abstract:
Landscape design will inevitably change original natural ecology，it needs reasonable design and construction，otherwise it will cause irreparable loss to original fragile ecological environment and reduce life comfort level.Basic concept and principle of ecological restoration and its application requirements were introduced，related technologies of ecological restoration were described，relationship between ecological restoration and landscape design was analyzed，that could provide theoretical reference for rational restoration of garden ecology.
Research Status and Development Prospect of Heat Pump Dryer
ZHANG Xingya, WU Jingjing, YU Haiming, LIU Haolu
2018, 8(8): 78-82.
Abstract(635) [PDF 708KB](129)
Abstract:
Heat pump system as an energy-saving device had been widely used in heating，cooling and dehumidification.In order to improve performance of heat pump system，many scholars had improved heat pump system and combined it with other mechanical devices，and achieved remarkable results and wide applications.A large number of experimental results showed that heat pump dryer could control drying temperature，relative humidity，product moisture content，drying speed，drying time and other factors to ensure product quality.Due to its low temperature drying characteristics，it is very suitable for food and agricultural products drying.
Parameter Optimization of Threshing and Redrying Process in Tobacco Processing
YANG Yang, YANG Yubo, WU Hao, YANG Song, OU Mingyi, WU Youxiang, XU Hongqing, LV Dashu, LIU Sucan
2018, 8(8): 83-85.
Abstract(586) [PDF 383KB](157)
Abstract:
In order to meet needs of Chinese-style fine cigarette and improve processing quality of threshing and redrying new line in Zunyi factory， threshing and redrying process parameters and tobacco lamina quality data at Zunyi factory was analyzed.And 3 key parameters were selected，process parameters of threshing and redrying new line at Zunyi factory were optimized by means of multi-index weight analysis and orthogonal design method.Research results showed that it could obviously improve cured tobacco quality when process parameters with 80 °water-added initiation at the back end，second-dozen electric motor 34 Hz and 30% of moisture regain mixing water .
Influencing Factors and Control Measures of Water Conservancy Project Construction Quality
GAO Zhiwei
2018, 8(8): 86-88.
Abstract(657) [PDF 440KB](146)
Abstract:
Steady increase of social economic and technological forces in China has injected fresh vitality into construction of water conservancy projects.At the same time，goal of maximizing economic benefits was paid too much attention in the initial stage of water conservancy project construction，which has caused varying degrees of damage to local environment，that resulting in frequent waste of water resources and unreasonable use of phenomenon.Factors of affecting construction quality control of water conservancy projects were analyzed in depth.Measures for promote development of water conservancy projects were put forward to improve construction quality of water conservancy projects，which help to provid a reference for water conservancy construction.
Management Current Status and Control Measures of Agricultural Water Conservancy Construction Cost
ZHANG Maoliang
2018, 8(8): 89-91.
Abstract(597) [PDF 460KB](127)
Abstract:
In construction of agricultural water conservancy projects，engineering cost is an important factor affecting project quality，project schedule control and project benefit.Problems of cost management and control in construction of agricultural water conservancy projects in China were analyzed，such as incomplete cost management system，lagging management means，incomplete cost performance appraisal system and so on.Management measures and suggestions for cost management were put forward to manage construction cost of agricultural water conservancy projects，and in view to provide reference for cost management of agricultural water conservancy projects.
Bench Test on Header of Seed Corn-harvester
LIU Shuping, TANG Zunfeng, MA Lijun, GAO Wei, BAO Chunlin
2018, 8(8): 92-95.
Abstract(589) [PDF 1217KB](114)
Abstract:
Level of seed corn harvest mechanization was low that had always been artificial in our country at present.In order to solve this problem，a header of corn-harvester was designed，orthogonal experiment based on three factors and three levels which included rotating speed of snapping roll，header height and harvest speed was conducted.Experimental results showed that header of seed corn-harvester had good harvest effect.Relationship between three factors and performance indicators were analyzed.Effect of indicators was best when speed of snapping roll was 800 r/min，harvest speed was 5 km/h and height of header was 600 mm.
Design on Auxiliary Mechanism of Paddy Harrow Grinding Machine in Medium Paddy Field
SHENG Liwei
2018, 8(8): 96-99.
Abstract(617) [PDF 762KB](150)
Abstract:
Medium paddy field ploughing and rake grader is a kind of agricultural machinery with 29.4 kW power tractor as power of paddy field plowing and raking and it is an indispensable agricultural machinery tool in modern agricultural production.A set of high efficiency and multi-performance auxiliary mechanism was designed according to its working performance and characteristics.Auxiliary mechanism not only provided installation platform for cutter shaft system and transmission system of rake grader，but also provided hanging device for connection between plough grader and tractor.At the same time，whole machine has four functions of rotary tillage，broken soil，flat soil and stubble，so auxiliary mechanism has a variety of performance and is simple compared with many kinds of single performance machine.
Design and Experiment of Multi-function Hydraulic Drive Field Operating Platform
LIU Qingmin
2018, 8(8): 100-105.
Abstract(555) [PDF 3119KB](153)
Abstract:
In order to solve problem that common field equipment could not adapt to field environment with varied ridge spacing and plant height，multi-functional hydraulic driven field operating platform was designed and developed，which could meet demands of field operation with varying row spacing and height，and could improve adaptability of platform.Multi-functional hydraulic driven field operating platform was driven by hydraulic drive mode，through mechanical analysis，power demand of whole machine was determined，and suitable engine，hydraulic pump，hydraulic motor and other hydraulic components were selected，power matching of operating platform was completed.Mesh generation and loads applying were applied to adjusting bracket that was a key part of multi-functional hydraulic driven field operating platform by using ANSYS Workbench simulation software，static analysis of adjusting bracket was carried out，strength and stiffness were checked，that met design requirement.Full load climbing experiment of multi-functional hydraulic driven field operating platform was carried out，results showed that power matching of whole machine was reasonable and met requirements of design and application.
Design on CXG-901 Multi-gear Adjustable Mower
TONG Yining, YAO Aiping, WANG Tao, LIU Guoguang, LOU Tingting, HUANG Xin
2018, 8(8): 106-109.
Abstract(533) [PDF 736KB](142)
Abstract:
CXG-901 multi-position adjustable lawn mower was designed.Overall structure of CXG-901 was introduced.Main technical parameters were determined.Function of multi-range adjustment was innovatively designed.And according to different environments，users could select appropriate cutting speed by adjusting gear to effectively improve user′s cutting efficiency and quality.
Optimization Design of Transmission Gear of Potato Harvester
MA Chunlei, XU Yong, LI Yongheng
2018, 8(8): 110-112.
Abstract(556) [PDF 3002KB](132)
Abstract:
Optimal design was carried out by taking bevel transmission gear of potato harvester gearbox as research object，and minimum volume as optimal object，gear′s structure size were obtained by MATLAB optimization toolbox，stress analysis of designed gear was carried out with SolidWorks Simulation，rationality of optimization design results were verified.
Propagation Experiment of Pholidota cantonesis Rolfe.
YOU Yunfei
2018, 8(8): 113-118.
Abstract(486) [PDF 816KB](98)
Abstract:
Regeneration system of Pholidota cantonesis Rolfe. was studied by taking Pholidota cantonesis Rolfe. legume as explants.Results showed that impregnation with 0.1% HgCl2 for 8 min was beneficial to asepsis seeding for Pholidota cantonesis Rolfe. legume and had low pollution rate.When seed germination medium was MS＋0.5 mg/L BA＋0.05 mg/L NAA＋7 g/L agar，germination rate of 72%，PLB color was green and agglomerate.When induced proliferation medium was MS＋0.1 mg/L ZT＋30 ml/L coconut＋0.05 mg/L NAA＋7 g/L agar，induction rate of 70%，maximum increment coefficient was 4.11.When seed germination medium was 1/2MS＋50 g/L potato＋50 ml/L banana juice＋1 g/L peptone，strong seedling effect was the most obvious，maximum width of seedlings was 3.54 mm，and plants were relatively thick.
Key Points of High-yield and High-efficiency Cultivation Techniques of Transplanting Non-polluted Sharp Pepper
CHEN Yuanxiong, HONG Yizheng
2018, 8(8): 119-122.
Abstract(411) [PDF 644KB](163)
Abstract:
High-yield and high-efficiency cultivation techniques for transplanting non-polluted peppers and seedlings were analyzed in detail.Selection of cultivation plots，development of nursery work，work of sorting and transplanting，field management work，pests and diseases of sharp pepper were reviewed，which help to improve quality of non-polluted sharp pepper and promote expansion of planting scale.
Analysis and Regionalization of Suitable Meteorological Conditions for Platycodon grandiflorus in Youyang County of Chongqing City
PENG Xiaoyan, TU Junhua, ZHANG Jianping, LI Na, WU Tinghe
2018, 8(8): 123-124.
Abstract(480) [PDF 331KB](124)
Abstract:
In order to analyze suitable meteorological conditions for Platycodon grandiflorus in Youyang county，Chongqing city，and effects of meteorological conditions on reproductive status of Platycodon grandiflorus，Platycodon grandiflorus was planted at different altitude areas and same planting pattern，comparative observation experiments of whole growth period of Platycodon grandiflorus were carried out，effects of meteorological conditions on growth period of Platycodon grandiflorus were analyzed，climatic regionalization of Platycodon grandiflorus planting in Youyang county was made in order to explore the best planting area for Platycodon grandiflorus.
Optimization Fermentation Media of Biocontrol Bacillus cereus BQ-4 by Response Surface Methodology
GUANG Zeyu, WANG Honglei, WANG Hongyan, DOU Le
2018, 8(8): 125-129.
Abstract(548) [PDF 3840KB](123)
Abstract:
Biocontrol Bacillus cereus BQ-4 strain which screened form the soil of plant rhizosphere was used as material and it′s fermentation medium was investigated by using single-factor and Box-Behnken design.The effects of sugar，patoto powder and （NH4）2SO4 were evaluated.Results showed that optimal concentrations of sugar，patoto powder and （NH4）2SO4 were 21.67、39.80 and 19.95 g/L.In this condition，endospore yeild of BQ-4 strain was 29.36×108 CFU/mL.
Meteorological Conditions for Fine Forage Grass Cultivation in Wushenzhao Town
WU Liqun, LUO Yuchang, GUI Nan, MO Dongwei, YANG Lin, ZHU Xubin
2018, 8(8): 130-133.
Abstract(547) [PDF 505KB](99)
Abstract:
Forage grass cultivation is closely related to climate.Relationship between good forage grass cultivation and climatic conditions was tested and studied respectively from June to August 2016 and from march to September 2017，issues with suitable growing season，growth spurt，suitable harvest period and winter survival of good forage for alfalfa and astragalus adsurgens in Wushenzhao town were mainly studied.Through nearly 2 years of specific experimental work，suitable growing season，growth spurt，suitable harvest period and winter survival rule of two kinds forages were preliminarily mastered from aspect of meteorology，that could accelerate development of animal husbandry in China.
Characteristics of Family Farms at Home and Abroad and Suggestions on Development of Family Farms in China
ZHANG Lejia, ZHANG Guangyu
2018, 8(8): 134-136.
Abstract(535) [PDF 482KB](105)
Abstract:
Definition and connotation of family farms were discussed.Characteristics of family farms in typical countries such as the United States，France and Denmark were listed.On this basis，problems existing in management of family farms in China were analyzed.Suggestions for development of family farms in China were put forward.
Development Trend of Agricultural Products Marketing Channel
SUN Fei
2018, 8(8): 137-139.
Abstract(425) [PDF 459KB](102)
Abstract:
With continuous development of China′s socialist market economy，agriculture also has made great progress，and transportation industry related to agricultural products is also developing towards convenience and scale，however，many problems have arisen in rapid development of agricultural product marketing channels.Main characteristics of modern agricultural products were expounded，factors influencing marketing channels of agricultural products and existing typical agricultural product marketing channels in China and their existing problems were analyzed，and finally development trend of China′s agricultural products marketing channel construction were put forward.
Causes and Countermeasures of Information Asymmetry in Quality and Safety of Agricultural Products
LIU Qiang
2018, 8(8): 140-141.
Abstract(586) [PDF 328KB](133)
Abstract:
Reasons for asymmetry of quality and safety of agricultural products were analyzed，and effective countermeasures were put forward.
Development Countermeasures for Agricultural Products Cross-border E-commerce in Shaanxi Province
PAN Yuxiang
2018, 8(8): 142-143.
Abstract(572) [PDF 332KB](146)
Abstract:
Current situation and suitable modes of agricultural products cross-border e-commerce in Shaanxi province was analyzed，and corresponding development countermeasures from 4 aspects of mode selection，standardization construction，logistics system and talent cultivation were putted forward.
Interaction between Agricultural Product Logistics and Agricultural Economic Growth
CHENG Xinzhi
2018, 8(8): 144-146.
Abstract(548) [PDF 466KB](108)
Abstract:
Agriculture is prerequisite and important foundation for country′ s prosperity，agricultural product logistics system is an important way to communicate agriculture and market.Connotation and function of agricultural logistics were expounded，interaction between agricultural logistics and agricultural economic growth was analyzed，problems existing in development of agricultural products logistics were pointed out，and corresponding suggestion were put forward，that could provide theoretical reference for construction and development of modern agricultural product logistics system.
Planning and Development of Tea Tourism Characteristic Town：A Case Study of Fenghuang Town，Chaozhou City，Guangdong Province
LU Zhihai
2018, 8(8): 147-149.
Abstract(458) [PDF 514KB](117)
Abstract:
China is hometown of tea，tea resource is rich，and a unique tea culture has been formed.In recent years，tea and tourism featured towns were constantly emerging.Taking Fenghuang town of Chaozhou，Guangdong as an example，current situation of development of tea culture characteristic town were expounded，conditions for developing Fenghuang town characteristic town were analyzed，and some development ideas for planning and development for characteristic town of tea tourism in Fenghuang town were put forward.
Development Status and Countermeasures of Leisure Agricultural Tourism
LI Ling
2018, 8(8): 150-151.
Abstract(598) [PDF 339KB](177)
Abstract:
Industrial integration is a new mode to break through traditional industrial development，which is a new form of tourism and also an inevitable stage for development of China′s tourism industry.Current situation and existing problems of leisure agricultural tourism under background of industrial integration were studied and corresponding countermeasures were put forward，that could provide theoretical reference for better development of leisure agricultural tourism.

Address： Mailbox 16, No.1, Beishatan, Dewai, Chaoyang District, Beijing (100083)

Tel：010-64882380、64883625

E-mail：nygc_2011@163.com

              d1ae2011@126.com

Total visits：

Copyright © Journal of Agricultural Engineering

京ICP备10026412号-72

京公网安备 11010502037498号

Email AlertRSS

Supported by: Beijing Renhe Information Technology Co., Ltd.