中国农业机械化科学研究院集团有限公司 主管

北京卓众出版有限公司 主办

钱少平, 钟志坤, 毛海良, 盛奎川. 表面处理对PLA/BP复合材料力学性能的影响[J]. 农业工程, 2014, 4(1): 37-40.
引用本文: 钱少平, 钟志坤, 毛海良, 盛奎川. 表面处理对PLA/BP复合材料力学性能的影响[J]. 农业工程, 2014, 4(1): 37-40.
shu
Qian Shaoping, Zhong Zhikun, Mao Hailiang, Sheng Kuichuan. Effect of Surface Treatment on Mechanical Properties of Poly（Lactic Acid）/Bamboo Particle Biocomposites[J]. AGRICULTURAL ENGINEERING, 2014, 4(1): 37-40.
Citation: Qian Shaoping, Zhong Zhikun, Mao Hailiang, Sheng Kuichuan. Effect of Surface Treatment on Mechanical Properties of Poly（Lactic Acid）/Bamboo Particle Biocomposites[J]. AGRICULTURAL ENGINEERING, 2014, 4(1): 37-40.
shu

表面处理对PLA/BP复合材料力学性能的影响

Effect of Surface Treatment on Mechanical Properties of Poly（Lactic Acid）/Bamboo Particle Biocomposites

    摘要
  • 摘要: 为改善竹颗粒（BP）与聚乳酸（PLA）的表界面性能，分别用氢氧化钠溶液和马来酸酐（MAH）对BP表面处理后，与PLA熔融共混制得完全生物可降解复合材料。通过扫描电子显微镜和力学性能测试，研究了碱处理及不同MAH浓度对竹颗粒及其复合材料力学性能的影响。结果表明：碱处理和MAH增容后，BP与PLA的表面相容性得到改善；当MAH添加量为1.0%时，复合材料有较佳的拉伸强度（47.6 MPa）和断裂伸长率（6.22%），而当MAH添加量为0.5%时，复合材料有较好的弯曲强度（72.61 MPa）和弯曲模量（4.65 GPa）。

     

    Abstract: To improve interfacial interaction between bamboo particle（BP）and poly（lactic acid）（PLA），sodium hydroxide solution was employed to pretreat BP and maleic anhydride（MAH）was used to compatibilize PLA/BP biocomposites.The biocomposite was prepared by melt blending and hot-pressing.Effects of alkali and MAH treatment on the properties of BP and its biocomposites were investigated using scanning electron microscope and mechanical measurements.Results showed that interfacial interaction between PLA and BP in the biocomposites was improved with MAH compatibilizer.Tensile strength and elongation at break of PLA/BP biocomposites reached maximal values of 47.6 MPa and 6.22%，respectively，when treated with 1.0% MAH.Maximal flexural strength and flexural modulus of 72.61MPa and 4.65 GPa were obtained with 0.5% MAH treatment.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回