柴油机缸体异型结构共线复合加工

石峰; 胡豪; 刘增凯; 罗一鸣

doi:10.19998/j.cnki.2095-1795.2022.06.019

柴油机缸体异型结构共线复合加工

doi: 10.19998/j.cnki.2095-1795.2022.06.019

1.
洛阳西苑车辆与动力检验所有限公司，河南洛阳 471039
2.
中国中铁工程装备集团有限公司，河南郑州 450016

详细信息

作者简介:
石峰，工程师，主要从事拖拉机、农用机械类主机及零部件检测设备开发研究E-mail：lainfeng@126.com

中图分类号: S220
计量
- 文章访问数: 65
- HTML全文浏览量: 39
- PDF下载量: 10
- 被引次数: 0
出版历程
- 收稿日期: 2022-04-13
- 修回日期: 2022-05-25
- 出版日期: 2022-06-20

Collinear Compound Machining of Abnormal Structure of Diesel Engine Block

1.
Luoyang Xiyuan Vehicle and Power Insperction Institute Co.，Ltd.，Luoyang Henan 471039，China
2.
China Railway Engineering Equipment Group Co.，Ltd.，Zhengzhou Henan 450016，China

摘要

摘要:
柴油机缸体是柴油机中精度要求高、加工工序多的关键部件之一，常规加工中关键工序采用加工中心等高精设备加工，精度要求一般、数量众多、非常规角度等影响加工中心节拍的工序，大多采用专用组合机床加工的形式加工。针对柴油机缸体常规加工工序中遗留部位的集成加工问题，设计了一套异型结构共线复合加工形式，实现4、6缸柴油机7种型号缸体的钻孔、攻丝、镗车端面等加工，并配有4、6缸缸体共线加工专用的自动夹具和自动移位输送机构。生产实践证明，该加工形式精简了工艺流程，减少自动加工线的设备数量，刀辅具设计经济合理，自动化夹具操作便捷，加工精度满足工艺要求。
- 柴油机 /
- 缸体 /
- 共线复合加工 /
- 专用机床 /
- 夹具 /
- 输送机构
Abstract:
Cylinder block of diesel engine is one of key parts of diesel engine with high precision and many processing procedures．In conventional processing, key processes were processed by high-precision equipment such as machining centers．And the processes that affect beat of machining center, such as general precision requirements, numerous quantities and unconventional angles, were mostly processed by special modular machine tools．Aiming at problem of integrated machining of remaining parts in conventional machining process of diesel engine block, a set of collinear compound machining form of special-shaped structure was designed．It can realize drilling, tapping and boring end face processing of 7 types of cylinder blocks of 4 and 6 cylinder diesel engines, and it is equipped with special automatic fixture and automatic shifting and conveying mechanism for collinear processing of 4 and 6 cylinder blocks．Production practice has proved that this processing form simplified process flow, reduced number of equipment in automatic processing line, design of auxiliary tools was economical and reasonable, the automatic fixture was easy to operate, and processing accuracy met process requirements．
- diesel engine /
- cylinder /
- collinear compound machining /
- special machine tool /
- fixture /
- conveying mechanism

HTML全文

图 1 Φ9 mm深孔加工工序

Figure 1. Processing procedure of Φ9 mm deep hole

下载: 全尺寸图片幻灯片

图 2 Φ9 mm深孔加工刀具布置

Figure 2. Tool arrangement for Φ9 mm deep hole machining

下载: 全尺寸图片幻灯片

图 3 圆形凸台端面加工工序

Figure 3. Processing procedure of end face of circular boss

下载: 全尺寸图片幻灯片

图 4 圆形凸台端面加工刀具布置

Figure 4. Tool arrangement for machining end face of circular boss

下载: 全尺寸图片幻灯片

图 5 Φ19 mm孔加工工序

Figure 5. Processing procedure of Φ19 mm hole

下载: 全尺寸图片幻灯片

图 6 Φ19 mm孔加工刀具布置

Figure 6. Tool arrangement for Φ19 mm hole machining

下载: 全尺寸图片幻灯片

图 7 PT3/8丝孔加工工序

Figure 7. Processing procedure of PT3/8 wire hole

下载: 全尺寸图片幻灯片

图 8 PT3/8丝孔加工刀具布置

Figure 8. Tool arrangement for PT3/8 wire hole machining

下载: 全尺寸图片幻灯片

图 9 工位设计方案

Figure 9. Station design scheme

下载: 全尺寸图片幻灯片

图 10 棘爪输送装置

Figure 10. Pawl conveyor

下载: 全尺寸图片幻灯片

图 11 自动定位装置

Figure 11. Automatic positioning device

下载: 全尺寸图片幻灯片

图 12 自动插拔销机构

Figure 12. Automatic plug pin mechanism

下载: 全尺寸图片幻灯片

图 13 自动顶紧机构

Figure 13. Automatic jacking mechanism

下载: 全尺寸图片幻灯片

参考文献(10)

[1]	李厚生．内燃机制造工艺学[M]．北京: 机械工业出版社, 1985．
[2]	乐兑谦．金属切削刀具[M]．2版．北京: 机械工业出版社, 2006．
[3]	汪同春.柴油机四、六缸机缸体机加工共线专机改造浅析[J].广西机械,2001(2):40- 42,56. WANG Tongchun.Analysis to the reform of the special macnhie for the machining line of cylinders of both four and six cylinder diesel engine[J].Guangxi Machinery,2001(2):40- 42,56.
[4]	臧加伦,张传龙.226B三四六缸缸体铸造工艺开发[J].中国铸造装备与技术,2009(4):17-19. doi: 10.3969/j.issn.1006-9658.2009.04.005 ZANG Jialun,ZHANG Chuanlong.Developing of foundry technology of cylinder block of model 226B with 3 or 4 or 6 cylinders[J].China Foundry Machinery & Technology,2009(4):17-19. doi: 10.3969/j.issn.1006-9658.2009.04.005
[5]	范玉玺.发动机缸体第一道工序加工[J].汽车制造业,2010(1):46-47.
[6]	陈国友.发动机缸孔变形试验及工艺分析[J].现代零部件,2010(8):42-44.
[7]	大连组合机床研究所．组合机床设计[M]．北京: 机械工业出版社, 1975．
[8]	向文俊.发动机缸体加工粗基准选择与定位方式的研究[J].组合机床与自动化加工技术,2013(7):97-101. doi: 10.3969/j.issn.1001-2265.2013.07.030 XIANG Wenjun.Rough reference selection and location mode research of engine block[J].Modular Machine Tool & Automatic Manufacturing Technique,2013(7):97-101. doi: 10.3969/j.issn.1001-2265.2013.07.030
[9]	金延安,洪方明.发动机缸体加工基准的选择[J].现代零部件,2010(8):78-79.
[10]	成大先．机械设计手册[M]．5版．北京: 化学工业出版社, 1985．