Development of Retractable Rod Tooth Buckwheat Threshing Device and Parameter Optimization
-
摘要:
针对荞麦机械化收获破碎率高、含杂率大、容易发生“绕辫子”而堵塞脱粒滚筒等问题,研制了一种伸缩杆齿式脱粒装置,利用纹杆滚筒和栅格凹板对作物的揉搓、梳刷作用实现脱粒,而与纹杆滚筒相配合的伸缩式杆齿,能够很好地将作物进行翻腾、向后推送,避免了秸秆缠绕,提高了脱粒效果。将该脱粒装置安装于荞麦脱粒性能试验台,选取滚筒转速、脱粒间隙和喂入量作为试验因素建立了3因素正交试验,通过极差分析得到最佳工作参数组合为滚筒转速350 r/min、脱粒间隙10 mm、喂入量1.0 kg/s,该条件下,籽粒破碎率为3.42%、籽粒损失率为0.14%,满足荞麦机械化收获指标,为伸缩杆齿式脱粒装置的应用和荞麦联合收获机的研发提供理论依据。
Abstract:A retractable rod tooth threshing device was developed to solve problems of high crushing rate, high impurity content and easy to "wrap around braid" and block threshing drum in mechanized harvesting of buckwheat.Threshing device utilized rubbing and brushing action of grooved rod drum and grid concave plate on crops to realize threshing.The crops were well rolled and pushed backwards, avoiding entanglement of straws and improving threshing effect.Threshing device was installed on buckwheat threshing performance test bench, and rotation speed of drum, threshing gap and feeding amount were selected as test factors to carry out orthogonal test.Under this condition, grain breakage rate was 3.42%, and grain loss rate was 0.14%, which met index of mechanized harvesting of buckwheat and provided a theoretical basis for application of retractable rod tooth threshing device and research and development of buckwheat combine harvester.
-
Keywords:
- buckwheat /
- retractable rod tooth /
- threshing device /
- orthogonal test /
- range analysis
-
表 1 试验台技术参数
Table 1. Technical data of test bed
项目 参数 脱粒滚筒类型 伸缩杆齿式 脱粒滚筒直径/mm 455 脱粒滚筒长度/mm 1 500 驱动电机 7.5 kW变频调速电机 喂入输送带(长×宽)/(m×m) 10×1 接料盒(长×宽×高)/(mm×mm×mm) 258×274×120 表 2 试验因素与水平
Table 2. Test factors and levels
水平 因素 滚筒转速A/(r·min−1) 脱粒间隙B/mm 喂入量C/(kg·s−1) 1 350 9 0.8 2 400 10 1.0 3 450 11 1.2 表 3 试验结果与极差分析
Table 3. Test results and range analysis
序号 因素 破碎率/
%损失率/
%A B C 1 1 1 1 4.47 0.15 2 1 2 2 3.67 0.10 3 1 3 3 3.27 0.05 4 2 1 2 5.20 0.09 5 2 2 3 4.93 0.21 6 2 3 1 3.81 0.32 7 3 1 3 6.17 0.30 8 3 2 1 5.01 0.36 9 3 3 2 3.47 0.24 破碎率 k1 3.80 5.28 4.43 k2 4.65 4.54 4.11 k3 4.88 3.52 4.79 R 1.08 1.76 0.68 较优水平 A1 B3 C2 主次因素 B3 A1 C2 损失率 k1 0.10 0.18 0.28 k2 0.21 0.22 0.14 k3 0.30 0.20 0.19 R 0.20 0.04 0.14 较优水平 A1 B1 C2 主次因素 A1 C2 B1 -
[1] 黄小娜,张卫国,党威龙,等.荞麦收获机械研究现状及发展趋势[J].农业机械,2018(10):84-90. doi: 10.16167/j.cnki.1000-9868.2018.10.023 [2] 陶桂香,衣淑娟.水稻轴流脱粒机理研究现状分析[J].农机化研究,2007(11):239- 241,243. doi: 10.3969/j.issn.1003-188X.2007.11.074TAO Guixiang,YI Shujuan.Analysis of the present situation and existing problems on corn axial threshing mechanics[J].Journal of Agricultural Mechanization Research,2007(11):239- 241,243. doi: 10.3969/j.issn.1003-188X.2007.11.074 [3] 衣淑娟,陶桂香,毛欣.两种轴流脱粒分离装置脱出物分布规律对比试验研究[J].农业工程学报,2008,24(6):154-156. doi: 10.3321/j.issn:1002-6819.2008.06.031YI Shujuan,TAO Guixiang,MAO Xin.Comparative experiment on the distribution regularities of threshed mixtures for two types of axial-flow threshing and separating installation[J].Transactions of the Chinese Society of Agricultural Engineering,2008,24(6):154-156. doi: 10.3321/j.issn:1002-6819.2008.06.031 [4] 李海同,万星宇,王华,等.油菜联合收获机集成式纵轴流脱离装置设计与试验[J].农业机械学报,2017,48(5):108-116. doi: 10.6041/j.issn.1000-1298.2017.05.013LI Haitong,WAN Xingyu,WANG Hua,et al.Design and experiment on integrated longitudinal axial flow threshing and separating device of rape combine harvester[J].Transactions of the Chinese Society for Agricultural Machinery,2017,48(5):108-116. doi: 10.6041/j.issn.1000-1298.2017.05.013 [5] 徐立章,李耀明,王成红,等.切纵流双滚筒联合收获机脱粒分离装置[J].农业机械学报,2014,45(2):105- 108,135. doi: 10.6041/j.issn.1000-1298.2014.02.018XU Lizhang,LI Yaoming,WANG Chenghong,et al.A combinational threshing and separating unit of combine harvester with a transverse tangential and an axial rotor[J].Transactions of the Chinese Society for Agricultural Machinery,2014,45(2):105- 108,135. doi: 10.6041/j.issn.1000-1298.2014.02.018 [6] 徐立章,李耀明,唐忠,等.4LQZ-6型切纵流联合收获机[J].农业机械学报,2013,44(8):94- 98,111. doi: 10.6041/j.issn.1000-1298.2013.08.017XU Lizhang,LI Yaoming,TANG Zhong,et al.4LQZ-6 tangential-longitudinal axial combine harvester[J].Transactions of the Chinese Society for Agricultural Machinery,2013,44(8):94- 98,111. doi: 10.6041/j.issn.1000-1298.2013.08.017 [7] 李耀明,王成红,徐立章,等.切纵流联合收获机脱粒分离装置田间试验与参数优化[J].农业机械学报,2014,45(11):111- 116. doi: 10.6041/j.issn.1000-1298.2014.11.017LI Yaoming,WANG Chenghong,XU Lizhang,et al.Parameter optimization and field test of threshing and separation device in tangential longitudinal combine[J].Transactions of the Chinese Society for Agricultural Machinery,2014,45(11):111-116. doi: 10.6041/j.issn.1000-1298.2014.11.017 [8] 李耀明,周伟,徐立章,等.单切双横流脱粒分离装置参数试验与优化[J].农业机械学报,2015,46(5):62- 67,92. doi: 10.6041/j.issn.1000-1298.2015.05.010LI Yaoming,ZHOU Wei,XU Lizhang,et al.Parameter test and optimization of tangential-horizontal-horizontal threshing and separating device[J].Transactions of the Chinese Society for Agricultural Machinery,2015,46(5):62- 67,92. doi: 10.6041/j.issn.1000-1298.2015.05.010 [9] 陈霓,熊永森,陈德俊,等.联合收获机同轴差速轴流脱粒滚筒设计和试验[J].农业机械学报,2010,41(10):67-71.CHEN Ni,XIONG Yongsen,CHEN Dejun,et al.Design and test on the coaxial differential-speed axial-flow threshing rotor of combine harvester[J].Transactions of the Chinese Society for Agricultural Machinery,2010,41(10):67-71. [10] 陈霓,余红娟,陈德俊,等.半喂入联合收获机同轴差速脱粒滚筒设计与试验[J].农业机械学报,2011,42(S1):39-42.CHEN Ni,YU Hongjuan,CHEN Dejun,et al.Design and test on the coaxial differential threshing rotor of head-feed combine harvester[J].Transactions of the Chinese Society for Agricultural Machinery,2011,42(S1):39-42. [11] 刘正怀,戴素江,田立权,等.半喂入联合收获机回转式栅格凹板脱分装置设计与试验[J].农业机械学报,2018,49(5):169- 178. doi: 10.6041/j.issn.1000-1298.2018.05.019LIU Zhenghuai,DAI Sujiang,TIAN Liquan,et al.Design and experiment on rotary grate concave threshing-separating unit of head-feeding combine harvester[J].Transactions of the Chinese Society for Agricultural Machinery,2018,49(5):169-178. doi: 10.6041/j.issn.1000-1298.2018.05.019 [12] 李毅念,陈俊生,丁启朔,等.轴流式和切流式机械脱粒对稻谷损伤及加工品质的影响[J].农业工程学报,2017,33(15):41-48. doi: 10.11975/j.issn.1002-6819.2017.15.005LI Yinian,CHEN Junsheng,DING Qishuo,et al.Effects of axial flow and tangential flow mechanical threshing on rice damage and milling quality[J].Transactions of the Chinese Society of Agricultural Engineering,2017,33(15):41-48. doi: 10.11975/j.issn.1002-6819.2017.15.005 [13] WANG Jiawei,LI Zhiwei,HUSSAIN S,et al.Design and threshing outputs study of internal and external rotary roller buckwheat thresher[J].INMATEH - Agricultural Engineering,2020,60(1):173-182. doi: 10.35633/inmateh-60-20 [14] WANG Jiawei,HUSSAIN S,LI Zhiwei,et al.Performance experiment of buckwheat threshing device with inner and outer roller rotation[J].International Agricultural Engineering Journal,2020,29(2):174-181. [15] MIU P I,HEINZ D K.Mathematical modeling of material kinematics in axial threshing units[J].Computers and Electronics in Agriculture,2007,58(2):93-99. doi: 10.1016/j.compag.2007.04.002 [16] MIU P I.Mathematical model of threshing process in axial unit with tangential feeding[J].International Conference on Computer Science and Automation Engineering,2002(2):212-219. [17] 耿端阳,何珂,王骞,等.横轴流式玉米柔性脱粒装置设计与试验[J].农业机械学报,2019,50(3):101-108. doi: 10.6041/j.issn.1000-1298.2019.03.010GENG Duanyang,HE Ke,WANG Qian,et al.Design and experiment on transverse axial flow flexible threshing device for corn[J].Transactions of the Chinese Society for Agricultural Machinery,2019,50(3):101-108. doi: 10.6041/j.issn.1000-1298.2019.03.010 [18] 曹成茂,李正,罗坤,等.山核桃二次破壳取仁机设计与试验[J].农业机械学报,2019,50(3):128-135. doi: 10.6041/j.issn.1000-1298.2019.03.013CAO Chengmao,LI Zheng,LUO Kun,et al.Design and experiment of secondary shell breaking machine for pecan[J].Transactions of the Chinese Society for Agricultural Machinery,2019,50(3):128-135. doi: 10.6041/j.issn.1000-1298.2019.03.013