食用菌袋栽液体接种机研发

陈长卿; 郑涛; 刘丹; 王洁; 朱建锡

doi:10.19998/j.cnki.2095-1795.2022.09.003

食用菌袋栽液体接种机研发

doi: 10.19998/j.cnki.2095-1795.2022.09.003

金华市农业科学研究院（浙江省农业机械研究院），浙江金华 321017

基金项目: 金华市重点科技项目（2020-2-030）；浙江省食用菌产业技术团队项目

详细信息

作者简介:
陈长卿，正高级工程师，主要从事食用菌机械、农产品加工机械研究　E-mail：496533235@qq.com

中图分类号: S226
计量
- 文章访问数: 61
- HTML全文浏览量: 18
- PDF下载量: 10
- 被引次数: 0
出版历程
- 收稿日期: 2022-06-14
- 修回日期: 2022-08-25
- 出版日期: 2022-09-20

Development of Liquid Inoculum Machine for Bagged Cultivation of Edible Fungi

Jinhua Academy of Agricultural Sciences （Zhejiang Academy of Agricultural Machinery），Jinhua Zhejiang 321017，China

摘要

摘要:
目前国内食用菌袋栽液体接种只有人工和半自动机型，生产效率低、接种量精度差、污染率高，不能达到食用菌袋栽规模工厂化生产要求。根据食用菌袋栽液体接种生产技术要求，对食用菌液体接种的自动运输、定位接种、检测等自动化连续作业进行研发设计，分析柔性接种定位难、接种量不均匀、污染率高等问题，提出了规模化生产食用菌袋栽液体接种机研发设计方案，可极大提高接种质量和生产效率，促进我国食用菌行业的转型升级与可持续发展。
- 食用菌 /
- 接种机 /
- 液体菌种 /
- 袋栽
Abstract:
At present, domestic liquid inoculator of edible fungus bag planting has only manual and semi-automatic models, with low production efficiency, poor accuracy of inoculum and high pollution rate, which can not meet requirements of large-scale factory production of edible fungus bag planting． According to technical requirements for production of liquid inoculation of edible fungi in bags, research and development of automatic continuous operations such as automatic transportation, positioning inoculation and detection of liquid inoculation of edible fungi were carried out． Problems of difficult location of flexible inoculation, uneven inoculation amount, high pollution rate were analyzwd． R & D design scheme of large-scale production of edible fungus bag planting liquid inoculum machine was put forward． It could greatly improve inoculation quality and production efficiency, and promote transformation, upgrading and sustainable development of China's edible fungus industry．
- edible fungi /
- inoculum machine /
- liquid strain /
- bag planting

HTML全文

图 1 袋栽液体菌种全自动接种机整机结构

1. 机架　2. 第3升降架　3. 升降框　4. 平移框　5. 第1升降架　6. 夹颈件　7. 连杆　8. 铰接件　9. 主传动轴　10. 传动件　11. 导向柱　12. 辊轴　13. 压条　14. 靠背　15. 菌种罐　16. 菌种分配器　17. 接种喷头

Figure 1. Complete machine structure of full automatic inoculum machine for bagged liquid bacteria

下载: 全尺寸图片幻灯片

图 2 自动稳袋开闭盖驱动机构结构

1. 移动件　2. 夹持件　3. 连接杆　4. 第2弹簧　5. 圆柱部件　6. 下压件　7. 第1弹簧　8. 活动槽　9. 限位部件

Figure 2. Structure of automatic bag stabilizing lid opening and closing driving mechanism

下载: 全尺寸图片幻灯片

参考文献(9)

[1]	柯家耀.我国食用菌的生产、贸易状况及对策探讨[J].福建轻纺,2009(12):36-40. doi: 10.3969/j.issn.1007-550X.2009.12.001
[2]	李玉．中国食用菌产业现状及前瞻[J]．吉林农业大学学报, 2018, 30（4）: 446-450． LI Yu．Present situation and prospect of chinese edible mushroom industry[J]．Journal of Jilin Agricultural University, 2018, 30（4）: 446-450．
[3]	陈青,潘孟乔.工厂化食用菌发展优势、制约因素及对策建议[J].食药用菌,2011,19(4):5-7.
[4]	刘欣,于天颖,王琛.我国食用菌工厂化生产现状与发展趋势分析[J].农业科技与装备,2013(12):72-73. doi: 10.3969/j.issn.1674-1161.2013.12.030 LIU Xin,YU Tianying,WANG Shen,et al.Analysis of the current situation and development trend of china's edible fungus production[J].Agricultural Science & Technology and Equipment,2013(12):72-73. doi: 10.3969/j.issn.1674-1161.2013.12.030
[5]	冀宏,赵黎明.食用菌工厂化生产技术改进方法与思路[J].中国食用菌,2009(6):56-58. doi: 10.3969/j.issn.1003-8310.2009.06.020 JI Hong,ZHAO Liming.Technical improvement ways and means of mushroom industrial production[J].Edible Fungi of China,2009(6):56-58. doi: 10.3969/j.issn.1003-8310.2009.06.020
[6]	胡志超,王海鸥,谢焕雄,等.我国食用菌工厂化生产的现状与发展[J].农业装备技术,2006,32(5):9-11. doi: 10.3969/j.issn.1671-6337.2006.05.002 HU Zhichao,WANG Haiou,XIE Huanxiong,et al.Status and development of edible fungus's industrialized production in China[J].Agricultural Equipment & Technology,2006,32(5):9-11. doi: 10.3969/j.issn.1671-6337.2006.05.002
[7]	赵密书,韩浪角.日光温室葡萄番茄食用菌立体栽培效益高[J].河北农业科技,2008(13):14-15.
[8]	论食用菌机械化加工和生产[C]．//农产品加工技术及装备与湖南“三化”．长沙: 湖南科学技术出版社, 2003: 123-125．
[9]	司伟伟．食用菌对称式液体菌接种机及控制系统设计[D]．北京: 中国农业机械化科学研究院, 2015． SI Weiwei．Symmetrical liquid inoculating machine and control system design for edible fungus[D]．Beijing: China Academy of Agricultural Mechanization Sciences, 2015．