国内打捆机技术进展

刘晶

doi:10.19998/j.cnki.2095-1795.2023.12.005

国内打捆机技术进展

doi: 10.19998/j.cnki.2095-1795.2023.12.005

刘晶

中国农业机械化科学研究院集团有限公司，北京 100083

详细信息

作者简介:
刘晶，高级工程师，副编审，主要从事农业机械化技术及期刊出版研究E-mail： 214627084@qq.com

中图分类号: S225
计量
- 文章访问数: 19
- HTML全文浏览量: 9
- PDF下载量: 4
- 被引次数: 0
出版历程
- 收稿日期: 2023-09-13
- 修回日期: 2023-11-07
- 出版日期: 2023-12-20

Domestic Baler Technology Progress

LIU Jing

Chinese Academy of Agricultural Mechanization Sciences Group Co.，Ltd.，Beijing 100083，China

摘要

摘要:
在分析国内打捆机研究现状的基础上，介绍了国内打捆机代表产品和主要技术特征，探究了国内打捆机的关键技术问题和未来发展趋势，为今后研究技术和性能先进的打捆机提供基础。
- 打捆机 /
- 收获机械 /
- 打结器 /
- 牧草 /
- 秸秆
Abstract:
On basis of analyzing current research status of domestic balers, representative products and main technical characteristics of domestic balers were introduced, key technical issues and future development trends of domestic balers were explored, to provide a foundation for future research on advanced technology and performance of balers．
- baler /
- harvester /
- knotter /
- forage grass /
- straw

HTML全文

图 1 9YG-2.2D型圆捆打捆机

Figure 1. 9YG-2.2D round grass baler

下载: 全尺寸图片幻灯片

图 2 中联重科9YF-2200型打捆机

Figure 2. ZOOMLION 9YF-2200 Baler

下载: 全尺寸图片幻灯片

表 1 9YG系列打捆机主要技术参数

Table 1. Main technical parameters of 9YG series baler

机器型号	9YGQ-2.2D	9YG-2.2D	9YGJ-2.2B
捡拾宽度/mm	2200	2200	2235
结构型式	18个辊筒	18个辊筒	18个辊筒
草捆尺寸/mm	Φ1200×1400	Φ1200×1400	Φ1200×1400
动力输出轴转速/ （r·min⁻¹）	540	540	540
配套动力/kW	≥75	≥75	≥75

下载: 导出CSV

参考文献(10)

[1]	高国民,郭辉,吕全贵,等.方捆打捆机草捆动态称重试验台设计与试验[J].农机化研究,2020(4): 139 - 144 . GAO Guomin,GUO Hui,LV Quangui,et al.Design and experimental research on baling dynamic weighing test rig for square baler[J].Journal of Agricultural Mechanization Research,2020(4): 139 - 144 .
[2]	叶凯强,高洪,时培成.基于循环神经网络的双轴打捆机智能换挡策略研究[J].安徽工程大学学报,2020,35(1): 40 - 46 . YE Kaiqiang,GAO Hong,SHI Peicheng.Research on intelligent shift strategy of biaxial baler based on recurrent neural network[J].Journal of Anhui Polytechnic University,2020,35(1): 40 - 46 .
[3]	蔡金易,丁源,赵娜,等.牧草高密度大方捆打捆机预切割装置拓扑优化设计[J].林业和草原机械,2021,2(1): 8 - 12 . CAI Jinyi,DING Yuan,ZHAO Na,et al.Topology optimization design of pre-cutting device of high-density large square baler for herbage[J].Forestry and Grassland Machinery,2021,2(1): 8 - 12 .
[4]	廖培旺,禚冬玲,付春香,等.自走式棉秆联合收获打捆机改进设计与试验[J].中国农机化学报,2021,42(7): 19 - 25 . LIAO Peiwang,ZHUO Dongling,FU Chunxiang,et al.Improve design and test of self-propelled cotton stalk combine harvest baler[J].Journal of Chinese Agricultural Mechanization,2021,42(7): 19 - 25 .
[5]	万其号,布库,高凤芹,等.小方草捆机草捆收获自动监控系统研制及试验[J].农机化研究,2021,43(3): 58 - 63 . doi: 10.3969/j.issn.1003-188X.2021.03.010 WAN Qihao,BU Ku,GAO Fengqin,et al.Development and test of automatic monitoring system for bale harvesting of small square baler[J].Journal of Agricultural Mechanization Research,2021,43(3): 58 - 63 . doi: 10.3969/j.issn.1003-188X.2021.03.010
[6]	王海超,孙小添,刘瑜,等.基于MATLAB的4YF-1300型大方捆打捆机喂入机构运动仿真分析与优化[J].中国农机化学报,2021,42(2): 31 - 36 . WANG Haichao,SUN Xiaotian,LIU Yu,et al.Simulation analysis and optimization of feeding mechanism of 4YF-1300 strapping machine based on MATLAB[J].Journal of Chinese Agricultural Mechanization,2021,42(2): 31 - 36 .
[7]	王成军,韩锰,龚智强.可变压捆室打捆机结构设计与仿真分析[J].中国农机化学报,2022,43(9): 1 - 6 . WANG Chengjun,HAN Meng,GONG Zhiqiang.Structural design and simulation analysis of baler with variable bale chamber[J].Journal of Chinese Agricultural Mechanization,2022,43(9): 1 - 6 .
[8]	张海滨,刘希锋,吴昊,等.青贮秸秆圆捆打捆机的设计与试验[J].农机化研究,2022,44(5): 52 - 56,62 . ZHANG Haibin,LIU Xifeng,WU Hao,et al.Design and experimental of round baler for silage straw[J].Journal of Agricultural Mechanization Research,2022,44(5): 52 - 56,62 .
[9]	郭喜燕,王振华,王馨,等.基于TRIZ理论的打捆机捡拾喂入系统改善[J].农业工程,2022,12(2): 87 - 89 . GUO Xiyan,WANG Zhenhua,WANG Xin,et al.Improvement of pickup and feeding system of baler based on TRIZ Theory[J].Agricultural Engineering,2022,12(2): 87 - 89 .
[10]	刘信鹏,杜嵇华,李尊香,等.甘蔗叶圆捆打捆机捡拾粉碎机构设计与试验[J].中国农机化学报,2023,44(6): 26 - 31 . LIU Xinpeng,DU Jihua,LI Zunxiang,et al.Design and experiment of picking up and crushing mechanism of sugarcane leaf round baler[J].China Journal of Agricultural Machinery Chemistry,2023,44(6): 26 - 31 .